Thursday, 22 June 2017

lithium ion - Li-ion battery charging and usage


I have a project in mind based around a Raspberry Pi Zero. The case I am using has slots for two AA batteries so I thought I would use some of the AA sized Li-ion batteries.


The batteries I want to use are 3.7V 2300mAh.


The charge circuit I found is: http://www.banggood.com/37V-Liion-Battery-Mini-USB-To-USB-A-Power-Apply-Module-p-928948.html


Ideally I would like to have two batteries in parallel so I could get 4600mAh, but I know there can be issues charging and discharging in parallel, plus I have no idea if that charge controller will do that.


My next option is to just use a single battery with that charge controller, that seems the easiest. Although I cant actually find any reliable info saying this circuit can charge Li-ions, Can I use anything advertised as charging Li-po on Li-ion?



One other option would be to put the two batteries in series and an LM7805 to bring the voltage down to 5V, would this be suitable? I would use an external charger that way.


Sorry for the broad question, if I use google all I get are things for Li-po batteries, and if I look for Li-ion charge modules all I get are the external type.


I am pretty good with amateur electronics, but I've never worked with these before and I don't want to get it wrong.




No comments:

Post a Comment

arduino - Can I use TI's cc2541 BLE as micro controller to perform operations/ processing instead of ATmega328P AU to save cost?

I am using arduino pro mini (which contains Atmega328p AU ) along with cc2541(HM-10) to process and transfer data over BLE to smartphone. I...