Friday 5 January 2018

Plug in charger in laptop before plugging in mains outlet



Feel free to delete the question if doesn't fit here.


Somebody told me, that a person should plug the charger in the laptop side first, then in the mains outlet, as if there is a current peak, it is less prone to burn the charger.


My knowledge to the data can't make any sense of this.


Does it make any sense?



Answer






  • If you connect the power supply to the laptop last, the output capacitors of the power supply will discharge to charge the input capacitors of the laptop, causing a large inrush current spike. However, no sensibly designed laptop will ever get damaged by this.




  • If you plug in the power supply last, the inrush current will be much less extreme as you will not be shorting capacitors together. However, the output voltage of a badly designed power supply might overhoot when it gets first plugged in, subjecting the now connected laptop to a voltage transient above the allowed input voltage range.




In practice it doesn't matter at all. By the way, laptop "chargers" are technically not chargers at all. The circuitry responsible for charging the battery is on the laptop motherboard and battery itself, while the power supply just outputs a constant voltage for the laptop to use.


No comments:

Post a Comment

arduino - Can I use TI's cc2541 BLE as micro controller to perform operations/ processing instead of ATmega328P AU to save cost?

I am using arduino pro mini (which contains Atmega328p AU ) along with cc2541(HM-10) to process and transfer data over BLE to smartphone. I...