Tuesday, 22 December 2015

resistors - What does "5k1" in the given schematic mean?



What does the "5k1" stands for it is a normal 5k Ohm resistor?


(Marked with "A" in the picture)


The chip is an MAX13020 LIN-transceiver.


Schematic with markes question



Answer



Resistors are often marked using the letter k (or letter M) instead of the decimal separator, so 5k1 means 5.1k\$\Omega\$ or 5100\$\Omega\$, while for example 1M2 means 1.2M\$\Omega\$.



A unique letter for each type of element can substitute for a decimal point in small values. For example, 6R8 is used to indicate a 6.8 \$\Omega\$ resistor. Similarly, the letter V substitutes for a decimal point in voltages such as 3V3 for 3.3 volts.


That same marking style is often used on ceramic or polyester capacitors, where for example "2n2" stands for 2.2nF.


About the diode, that's not just a B, there's written "BAT46" that is a specific kind of diode. A datasheet from Vishay can be found here.


No comments:

Post a Comment

arduino - Can I use TI's cc2541 BLE as micro controller to perform operations/ processing instead of ATmega328P AU to save cost?

I am using arduino pro mini (which contains Atmega328p AU ) along with cc2541(HM-10) to process and transfer data over BLE to smartphone. I...