Say I have a 1F capacitor that is charged up to 5V. Then say I connect the cap to a circuit that draws 10 mA of current when operating between 3 and 5 V. What equation would I use to calculate the voltage across the capacitor, with respect to time, as it is discharging and powering the circuit?
Answer
charge on a cap is a linear product of capacitance and voltage, Q=CV. If you plan to drop from 5V to 3V, the charge you remove is 5V*1F - 3V*1F = 2V*1F = 2 Coulombs of charge. One Amp is one Coulomb per second, so 2C can provide 0.01A for 2C / (0.01 C/sec) or 200 seconds. If you actually withdraw charge from the cap at a constant current, the voltage on the cap will decrease from 5V to 3V linearly with time, given by Vcap(t) = 5 - 2*(t/200).
Of course, this assumes you have a load that draws a constant 10mA even while the voltage supplied to it changes. Common simple loads tend to have relatively constant impedance, which means that the current they draw will decrease as the cap voltage decreases, leading to the usual non-linear, decaying exponential voltage on the cap. That equation has the form of V(t) = V0 * exp(-t/RC).
No comments:
Post a Comment