Wednesday, 16 August 2017

solar cell - How do I avoid overcharging a battery?


I've got a solar panel (12V, 330mA, 2W) which I will use to charge a (12V 5Ah) lead acid battery. I'll put a voltage regulator and shottky diode in between the two.


However, could overcharging become an issue? Say I don't discharge the battery in any way, what happens when the battery is full and the solar panel just keeps delivering power?



Answer



It doesn't sound like you need anything more between the solar panel and the battery than just a Schottky diode. Your panel is rather wussy compared to the battery, so it doesn't look like there is anything it can do to hurt the battery.



How much current can the solar panel deliver at 13.6 V or so? That is usually the voltage that "12 V" lead-acid batteries can be float-charged at indefinitely. The panel probably can't even put out enough power to get to 13.6 V, especially with a diode in there.


The real problem may be that the panel can't produce enough voltage to charge the battery all the way. Check the panel and battery specs carefully, and don't forget to consider the voltage drop on the diode.


No comments:

Post a Comment

arduino - Can I use TI's cc2541 BLE as micro controller to perform operations/ processing instead of ATmega328P AU to save cost?

I am using arduino pro mini (which contains Atmega328p AU ) along with cc2541(HM-10) to process and transfer data over BLE to smartphone. I...