We are trying to use a raspberry pi to record the current going through a dc circuit. The circuit we are trying to measure the current in is powered by a car battery. We have no idea how to record the current and input it into the pi. Plus the entire circuit has to powered of one 9v battery or similar it has to fit into the greenpower f24 regulations. It has to be a pi an Arduino or similar is not an option plus we need the results in a spreadsheet. Thanks in advance.
Subscribe to:
Post Comments (Atom)
-
Can you please give me a definition, or at least a more specific context, of the term "point-of-load" converter/regulator? I have ...
-
My input is an FM carrier of 80.00MHz. It is FM modulated with 625kbpsec data. The deviation from carrier is about +/-700kHz. The data never...
-
My application has a small device, which draws about a watt, and is powered through a small dynamo, backed by a battery: The dynamo generate...
-
Related question: Ceramic capacitors: how to read 3-digit markings? I have some ceramic capacitors with a 2-digit marking. How to read them?...
-
Looking at all the various schematics of op amps, regulators, etc. I see lots of multicollector or multiemitter BJTs (and why no multibase?)...
-
It is well understood that if you have a device that uses a Lithium-Ion battery, and if the battery starts to bulge, then something is wrong...
-
I'm having an issue with my Silicon Photomultiplier (SiPM) feedback circuit. The output is not behaving as expected. My board schematic ...
No comments:
Post a Comment