Monday 25 February 2019

Headphone OUT to microphone IN for mobile phones


My AIM is to feed audio to mobile phones over MIC IN port. This audio would be coming from Laptop's headset out port. The way i am testing is making call from the test device which is connected to my laptop. What is want is to hear the audio which been played on system at the call termination mobile device. I tested the these two circuits and here are my observation :


Circuit 1 : NO audio received at the terminating mobile. May be the resistor values are too high. I didn't tired with lower resistor values.


Circuit 2 : Audio was received at the terminating mobile device but was very low. I removed resistor and capacitor both and tested directly.Audio became loud enough but quality was poor. There was too much of 'air' like audio with some high peak audio loss too. i just connected capacitor and tested. Audio became little low but quality was still poor.


Please suggest how this conversion is possible, maintaining high audio quality ? May be i am using too high capacitor and resistor?



Circuit 1:


Circuit 1


Circuit 2:


enter image description here




No comments:

Post a Comment

arduino - Can I use TI's cc2541 BLE as micro controller to perform operations/ processing instead of ATmega328P AU to save cost?

I am using arduino pro mini (which contains Atmega328p AU ) along with cc2541(HM-10) to process and transfer data over BLE to smartphone. I...