'Missing subcircuit' when creating a Pspice library part from the OPA188 Spice file provided by TI

I created a Pspice part using the Spice file provided by TI. When simulating, I get the following error:

ERROR(ORPSIM-15108): Subcircuit RNOISE_FREE_0 used by X_U1.XR101 is undefined ERROR(ORPSIM-15108): Subcircuit RNOISE_FREE_0 used by X_U1.XR105 is undefined ERROR(ORPSIM-15108): Subcircuit RNOISE_FREE_2 used by X_U1.XR104 is undefined ERROR(ORPSIM-15108): Subcircuit RNOISE_FREE_0 used by X_U1.XR103 is undefined

Some of the lines with the offending subcircuits are as follows:

XR109_3 23 9 RNOISE_FREE_0 XR109_4 41 9 RNOISE_FREE_0

Would 'RNOISE_FREE...' be circuits recognized by TINA (TI's software) but not by PSPICE? Could I replace them with an equivalent?

Thanks!